Pianos routinely make movers yearly list of items that are most frequently damaged. Grand pianos are specifically troublesome. Practicing the following procedures for dismantling, padding and filling grand pianos will avoid damage, lower claims expense, and enhance customer fulfillment.
1) At least 3 individuals are needed to handle an infant grand piano. If the child grand piano needs to increase or down stairs or if a complete or concert grand piano requires to be transferred, a minimum of 4 individuals are needed.
2) Constantly finish a accurate and comprehensive stock. It might be preferable or required to utilize a visual stock to effectively describe and show pre-existing damage.
3) As various parts are dismantled, please location all hardware in a properly labeled parts bag and then place the parts bag in a "Parts Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the lid by eliminating the hinge pins. Have someone wiggle the lid, holding it opposite the hinge, while a second person works the pin loose. Please take care not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a little cloth to help avoid damage to the wood if essential. Wrap the cover in a clean furniture pad.
6) Eliminate the prop that holds the lid open and cover it in a tidy furniture pad. The prop has a hinge pin and is in 2 pieces.
7) Remove the pedal assembly and wrap it in a clean furnishings pad. When getting rid of the screws, please be careful not to drop the braces. As you deal with the piano, number the push-rods from left to right as "1", "2", and "3", by positioning a piece of masking tape with the appropriate number on each rod.
8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to prevent it from unrolling) on the cover of the keyboard to prevent it from flopping open while you handle the piano. Note: Please ensure that the surface area of the piano is dust-free before padding it.
9) Position a piano board and attach the straps so that it is prepared to get the piano. The raised brace on the piano board should be at the keyboard end of the piano.
10) Get rid of the left front leg by placing one person beneath the piano at the left end of the keyboard. Be sure to have 2 people lifting the corner of the piano while the 3rd person eliminates the leg. Keep in mind: Please be sure to note which legs were gotten rid of from which positions because some pianos have legs that are not interchangeable.
11) Location the piano on the piano board by decreasing the "leg-less" end onto the board. Please be sure to raise the whole piano slightly while completing this maneuver to prevent unnecessary pressure on the staying, connected legs as the piano ideas. Be sure that the piano is focused snugly versus the brace at the end of the piano board.
12) Get rid of the 2 remaining legs and cover them in clean furniture pads. These legs are held in location by a "crucial and slot" plan. To eliminate the leg, slide it inward toward the center of the piano till it comes out of the slot.
13) Protect the piano to the piano board by bringing completions of the straps together and attaching them. Place folded burlap pads over the furniture pads however under the straps to offer additional defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, connect the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for protection versus residence damage, position the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the leading end of the piano board to prevent the piano from slipping.
16) To fill the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard facing the wall of the preceding tier. The finest place to fill the padded cover is between the piano and the preceding tier or between the wall and the piano.
Grand pianos represent a substantial challenge, they can be moved without pop over to these guys damage by using typical sense and practicing the treatments noted above.